Discussion in 'Elrasoft-UPA' started by Zckariya70, 16 October 2017.
Fijistu updated anybody tested............?
Yes tested with Fujtisu MB91F061 Upa V 1.4.1.00, 100%
I want to buy upa ? Someone know where to buy?
One of the best little programmers ever invented...and at a good price too for the original
Yep you can't really argue with the build of it,nor the price
Elrasoft has updated Fijistu ver : - 18.104.22.168 On 08/10/2017 and some bugs fixed...............
Does it read s912 secueed mcu like in audi elv or mb ezs or bmw cas?
Fujitsu in upa-s in contents of programs not to be found. or am I looking bad?? ..... +
No not added Fijistu information in content....................
send mail to Mr Penko and I had support about the case...
he sent me diagrams...
I'll upload them soon
note: possibly "MCU Renesas" will be added soon Similar to "TOYOTA and other airbags" as was the case with the note that he wrote, because I asked him about that
For MB91F058 and MB91F060 use MB91F590 connections
For MB91F061 and MB91F062 use MB91F570 connections
Yes it read.
Only need script and put it to folder \Program Files (x86)\ELRASOFT\UPA-USB Suite\Device Programmer-S\DeviceScripts
Test at your own risk!
Use a 100nf condenser p4(programmer) to extal pin(MCU)
I cannot guarantee 100% success at all!
test at your own risk
Save attached script to device script folder C:\Program Files (x86)\ELRASOFT\UPA-USB Suite\Device Programmer-S\DeviceScripts In uuprog-s software Select from device list select <9s12 sec> mc9s12xe100 sec Make usual BDM connections from programmer to MCU BKGD, Reses Vss and power (Vddr) Make an additional connection between p4(programmer) to extal pin(MCU) through a 100nf condenser
Try reading Dflash then Pflash
Save Dflash then Pflash dumps
Verify Dflash then Pflash
Next you can try program some data to dflash
Anybody with pinout for MB91F467D ?
FUJITSU SEMICONDUCTOR MB91F467D preliminary datasheet ...
PDFwww.fujitsu.com › fma › pdfmcu › fr_M...
Pag 63... use....
Upa-s to @Penko ....soport.......
he will give you better advice on how to read it
Ok will try it with email to Penko